Tranzcode 0.4

DOWNLOAD

A windows command line utility used to transcode multichannel wav files into mono wavsA windows command line utility used to transcode multichannel wav files into mono wavs by outputting the number of wavs depending on the number of channels read from the wav header. Will also decode/transcode .dts files (48kHz) and DTSWav (44.1kHz) directly into mono wavs depending on thenumber of channels found. DTS decoding was made available using libdts from dtsdec source code written by Gildas Bazin with some help from Sam Hocevar which was based on a52dec code with original credits going to Aaron Holtzman and Michel Lespinasse. Modifications were made to outputmono wavs directly, including LFE output. Currently there is no AC-3 support, but plans for it in the future.Multichannel Transcoding:---------------------------------Mono wav outputwill be PCM (non extensible), and have the same bit resolution and sample rate as the multichannel sourcewav. Supports very large wavs files (> 4GB), including wav extensible format. Supports 2-ch (stereo), upto 18 channels. If a mono wav is transcoded, the result will be an "empty" or blank wav with the samecharacteristics as the source wav.Suffix naming convention: Is the same as the output order (as displayed during transcoding):2 channels:-L (Left)-R (Right)3 channels:-L (Left)-R (Right)-C (Center)4 channels:-FL (Front Left)-FR (Front Right)-BL (Back Left)-BR (Back Right)5 channels:-FL (Front Left)-FR (Front Right)-C (Front Center)-SL (Surround "Back" Left)-SR (Surround "Back" Right)6 channels:-FL (Front Left)-FR (Front Right)-C (Front Center)-LFE (Low Frequency Effect)-SL (Surround "Back" Left)-SR (Surround "Back" Right)7 channels:-FL (Front Left)-FR (Front Right)-FC (Front Center)-LFE (Low Frequency Effect)-BL (Back Left)-BR (Back Right)-FLC (Front Left Center)...DTS Transcoding:-----------------------Transcoded .dts (48kHz) and DTSWav (44.1kHz) files into 32 bit float mono wavs regardless of the bitresolution they were originally encoded with. The number of output mono wavs depends on the numberof channels read. There is also a downmix option (/S) to output a 16 bit stereo wav. It does not support DTS ESThe output order (is the same as displayed during transcoding):Usually as 6 or 5 channels, having the suffix name appended as follows:(note: SL & SR were used instead of BL (Back Left) & BR because I got accustomed to the naming convention)6 channels:-FL (Front Left)-FR (Front Right)-C (Front Center)-LFE (Low Frequency Effect)-SL (Surround "Back" Left)-SR (Surround "Back" Right)5 channels:-FL (Front Left)-FR (Front Right)-C (Front Center)-SL (Surround "Back" Left)-SR (Surround "Back" Right)...Some examples of its usage:1) Transcodes to (6) 32 bit float mono wavs using "temp-" as the output prefix name:tranzcode "Us and Them.dts" tempoutputs: temp-FL, temp-FR, temp-C, temp-LFE, temp-SL, temp-SR2) Transcodes to (6) 32 bit float mono wavs using "-" as the output prefix name:tranzcode "Us and Them.dts"outputs: Us and Them-FL, Us and Them-FR, Us and Them-C, Us and Them-LFE, Us and Them-SL, Us and Them-SR3) Transcode to (2) 32 bit mono wavs (selected channels only/cancels the others):tranzcode Us_and_Them.wav /+C,LFEoutputs: Us_and_Them-C, Us and Us_and_Them-LFE4) Transcode to (4) 32 bit mono wavs (selected channels are cancelled):tranzcode Us_and_Them.wav test /-C,LFEoutputs: test-FL, test-FR, test-SL, test-SR5) Downmix to a 16 bit stereo wav without gain adjust:tranzcode "Us and Them.dts" /Soutputs: Us and Them-(stereo).wav6) Downmix to a 16 bit stereo wav with 15% (lower) gain adjustment (x .15):tranzcode Us_and_Them.wav" "downmix test" /S@15%outputs: downmix test-(stereo).wav

multichannel wav wav transcoder wave transcoder wave trnascoder transcode mono

You must be logged in to post a new comment or review. If you do not have account on FilesTube.com click here to sign up.